can am dis recall

Print Thread

can am dis recall #40298 09/25/18 03:49 PM 09/25/18 03:49 PM
Joined: Jul 2011 Posts: 13 Wayne NJ B Bobby OP stranger
Bobby OP stranger B Joined: Jul 2011 Posts: 13 Wayne NJ	Hello I just incountered a problem on my 2011 outlander 800 the dps light came on when i was loading it on to the trailer. Did some research on the computer and found a recall for 2010 2011 gave my vin to a dealer and BRP I was told my vin not in the recall . Some problem as the recall . Anyone else have this same issue is there any recourse back to BRP . Its a $$$$ repair. Need help Thanks

Re: can am dis recall [Re: Bobby] #40301 09/27/18 03:38 PM 09/27/18 03:38 PM
Joined: Jul 2010 Posts: 44 W PA T topgun newbie
topgun newbie T Joined: Jul 2010 Posts: 44 W PA	Is it still giving you trouble or just the one time? You can enter your VIN and see if the machine is under recall. https://can-am.brp.com/on-road/owners/safety/safety-recalls-vin-lookup.html Here is the actual recall: https://can-am.brp.com/content/dam/canam...11-11-14_en.pdf Back then, there were several updates being the PS was a new product in 2010. I seem to remember there was a serial # on the PS unit that had to be met for the recall as not all were affected. Starting in 2012, BRP installed a heat shield by the electric motor to protect it from heat. Some things you can also check, be sure your battery wires are tight. There is also a plug on the stator that was known to fail over time. It's under the seat below the heat shield. https://www.can-amtalk.com/forums/topic/20718-attn-20102011-can-am-owners/